JAB-1024M
24+2G Managed Optical Ethernet SwitchThe JAB-1024M is a high-performance managed Layer 2 switch, which offer up to 24 100Mbps POF ports and 2 10/100/1000Base-TX or optional SFP 1000Base-X ports for flexibility and fast connection speeds. Its network management solution allows administrators to easily configure features, monitor performance, and troubleshoot the switches using a standard RS-232 port, Web browser and Simple Network Management Protocol (SNMP)-based network management platforms.This L2 managed switch is designed to meet the emerging FTTH /FTTD requirement.
| Product Name | 24+2G Managed Optical Ethernet Switch |
| Product Number | JAB-1024M |
Equipment Port | Gigabit ports: two 10/100/1000Base-TX RJ45 ports or two optional SFP 1000Base-X LC ports. |
| 100M ports： twenty-four 100M POF ports | |
| Management Port | 1 Console port |
Network standards and protocols | IEEE:802.3, 802.3u, 802.3z,802.3ab,802.1d, 802.1p,802.1q,802.1v,802.1ad,802.3x, 802.1x |
| IEFT: RFC1157 SNMP, RFC 1112/2236 IGMP, RFC854 Telnet, RFC1123/1493/1643 MIB | |
Features | Non-blocking store-and-forward shared-memory architecture with an 8.8Gbps switching capacity and an efficient self-learning and address recognition mechanism enables the forwarding rate to proceed at a full wire speed. |
| 6k address table for auto-learned unicast or static unicast/multicast addresses. | |
| 7 trunk groups of up to 4 member ports within 26 ports with flexible load distribution control and fail-over function. | |
| Static priority and 802.1p Class of Service with 2-level priority. | |
| 802.1d Multiple Spanning Trees. | |
| 802.1x port based network access control. | |
| 802.3x flow control for a full-duplex mode and collision-based backpressure for a half-duplex mode. | |
| Port-based VLAN and 802.1Q tag-based VLAN with 255 VLAN groups. | |
| Head of Line (HOL) blocking prevention | |
| Static MAC addressing and filtering. | |
| Port mirroring. | |
| Source-port-based, destination-port-based, and source-destination-pair-based Sniffer functions. | |
| By-port Egress/Ingress bandwidth management control. | |
| IP Multicasting with IGMP snooping and an IP multicast table of 256 entries . | |
| Broadcast storm filtering. | |
Transmission Medium | ◇Dual multimode fiber(50/125μm), single wavelength 850nm, dual LC connectors, operating distance 550m. ◇Dual multimode fiber(62.5/125μm), single wavelength 850nm, dual LC connectors, operating distance 275m. ◇Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual LC connectors, operating distance 15/40km. |
| Φ2.2mm Duplex Plastic Optical Fiber Cable, core material PMMA ,Wavelengh 650nm | |
Network Management | In Band: SNMP, Web-based HTTP and Telnet with dedicated port or 802.1Q VLAN to increase the management security. |
| Out of Band: RS-232 Console. | |
| Dimensions (Lx W x H) | 19-inch rack-mount width, 1.0U height. |
| 440mm x 140mm x 44mm | |
| Weight | 4.3kg |
| Power Supply | AC90~264V/1.2A max, 50/60Hz |
| Power Consumption | 50W |
| Work Environment | Temperature: 0ºC to 40ºC |
| Humidity: 5% to 95% (Non-condensing) | |
| Storage Environment | Temperature: -25ºC to 70ºC |
| Humidity: 5% to 95% (Non-condensing) |
塑料光纤交换机属于塑料光纤接入网集成系统中的一部分，用于汇集用户端的数据并上传至公网，同时也向下传输外网的信息至用户，是塑料光纤接入网集成系统的中心节点之一。
塑料光纤接入网属于屏蔽系统，无电磁干扰，可以与电线一同安装。数据流通过时，电线对其不会产生干扰，高质量的语音、数据和图像信号被完整地传送给每个信息点。
塑料光纤特别适合接入点多的楼层水平布线场景。中心机房到楼宇间干线可采用石英光纤。鉴于石英光纤在安装、测试、拉拔、弯曲、震动，眼保护、环境保护等方面的问题，难以在用户端普及。塑料光纤具有抗弯曲、耐震动、价格便宜、施工方便的优点，柔软和超细外径的塑料光缆无论是在墙内、墙外、墙脚线、地毯下方还是天花板或其他线缆通道，也无论是新建筑施工还是旧楼宇改造，铺设起来都极为方便。终端使用者可以随意将塑料光纤切成需要的长度自行安装，即插即用，轻易实现光纤连接终端设备，与石英光纤配合构筑全光网络。
